Toyota tacoma maint reqd light. Press and hold the odometer button.
Toyota tacoma reset maint reqd light indicator.
How to reset maintenance light on toyota tacoma 2014. Press and hold the trip meter reset nob (next to your toyota tacoma's odometer). Follow the instructions below to reset the maintenance required minder light on your toyota tacoma: Toyota tacoma reset service light.
Hold knob for at least 5 seconds until “maint reqd” flashes multiple times and the light goes off. This is easy to reset the maintenance light using the trip button. This is how you turn off the maintenance light on a prius.
Reset is complete and you are done. Thanks to you guys for your help but your version doesn't work on this vehicle. There are 2 methods to reset the maintenance reminder on your toyota tacoma.
To make it a little clearer, make sure the tripa odometer is showing, turn off the key, then hold the odometer reset button and turn the key past the accessories position to the ignition position without starting the engine. Press and hold the trip reset button near the odometer until “trip a” appears on the central screen. Turn the key back to “off.”.
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. While holding the trip meter reset nob, turn the ignition to 'on', but do not start your toyota tacoma. Continue to hold the odometer button for about 10 seconds.
This reset should be done after changed the engine oil and filter according to. So the first thing you should do is: Turn the ignition switch to the “on” position, but do not start the engine.
Toyota tacoma maint reqd light. If the system fails to reset, the light will continue flashing. Push and hold the trip meter reset button on the dashboard, then turn the key to position two.
Put your key in the ignition and turn it to position one, which is the position right before starting the car. With vehicle ignition switched to on position, make sure odometer is showing “tripmeter a”, then turn the ignition switch to off position. Continue holding the reset button until the trip odometer reads 000000 and the maint reqd light goes off.
For toyota tacoma years 2010, 2011, 2013, 2014, 2015 models the oil reset the maint reqd light system can also be reset as follows: A quick video showing you how to easily and quickly reset the service light on a 2014 toyota tacoma. Engine oil reset procedure 1.
The light should then flash, beep, and then go out. For toyota tacoma years 2010, 2011, 2013, 2014, 2015 models the oil reset the maint reqd light system can also be reset as follows: Ok here is the way to reset the 2014 tacoma trd.
Press and hold odo/trip button and turn ignition to the “run” position. Turn your ignition key to the 'acc' or 'lock' position. Press and hold the odometer button.
Keep holding the odometer button for 10 seconds. Push and hold the trip reset or mode button. Push and hold down the odo button and push the power button twice with your foot off the brake.
While pressing the button to reset the trip, turn the key back to the “on” position. The flashing dashboard light will go off and the reading on the odometer will reset. Turn the key to the on position with the odometer showing.
Nearly every make and model year of toyota vehicle has the same process to reset the maintenance required light. Turn the key back to on, while you are holding the button down you will notice the maintenance light blink and go out. Some models don’t have the odo/trip button.
To reset the maintenance lamp turn the car key to on (not start), set your odometer on mileage (not trip a or b), then depress and hold the button that switches from odo and trip then turn key off. Once it reaches 5,000 miles again, the “maintenance required” light will turn on again. Then the light should go out.
Turn key back to lock. Push and hold odo/trip button, turn key on. Please follow the instructions below according to your vehicle trim level.
Turn the key to the off position while still holding the odometer button. The maintenance light should start to flash, and you may hear a beeping sound. To reset the maintenance lamp turn the car key to on (not start), set your odometer on mileage (not trip a or b), then depress and hold the button that switches from odo and trip then turn key off.
I just finished the oil change, and then now i’m back in the car, and we’re going to do the maintenance reminder reset. Turn the key back to on, while you are holding the button down you will notice the maintenance light blink and go out. Continue to hold down the trip odometer reset button until “000000” miles appears on the display and the maintenance light turns off.
With truck running switch to trip a.